PAX Payment Terminal Replacement NOT Hosted by RITE - Android Devices

Modified on Mon, 29 Apr at 8:37 AM


These are the standard settings to provide or verify with your processor when setting up a PAX Payment Terminal not hosted by RITE. This applies to Android devices:


  1. Switch your Payment Terminal on. Make sure that the screen shows the normal payment screen and NOT the BroadPOS Menu Screen. If it's showing the BroadPOS Menu screen, this means that the application is not installed yet. 
  2. Please contact your processor and ask them to install the application before proceeding. You may need to power cycle the terminal once the processor verifies that the application is ready for download and installation.
  3. Once the application is installed, verify that the following configurations are in place:


 This is where signature and receipt settings are configured

Field NameValue
Support PrintDisabled
Dedicated Device (Full Screen) ModeEnabled
Signature CaptureEnabled
EMV Signature CaptureEnabled
Signature with Cancel ButtonEnabled
Signature Typee-Signature
Print MID on ReceiptDisabled
Print Total Sales on Tip ReportDisabled
ECR-Terminal Integration ModeExternal POS

See the below image for additional reference:


 These settings ensure that the EMV chip is read properly and that the tap feature will work correctly

Field NameValue
Enable EMV FeatureEnabled
CVM Required Limit0.00

See the below image for additional reference:

Communication Tab

Field NameValue
Primary Comm. TypeLAN
Communication TypeEthernet
Protocol TypeTCP/IP

See the below image for additional reference:


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article